Cisco ASA 5505

Chapter 6 Scenario: DMZ Configuration
What to Do Next
6-28
ASA 5505 Getting Started Guide
78-18003-02
Alternatively, ASDM prompts you to save the configuration changes permanently
when you exit ASDM.
If you do not save the configuration changes, the old configuration takes effect
the next time the device starts.
What to Do Next
If you are deploying the adaptive security appliance solely to protect a web server
in a DMZ, you have completed the initial configuration. You may want to
consider performing some of the following additional steps:
You can configure the adaptive security appliance for more than one application.
The following sections provide configuration procedures for other common
applications of the adaptive security appliance.
To Do This... See...
Refine configuration and configure
optional and advanced features
Cisco Security Appliance Command
Line Configuration Guide
Learn about daily operations Cisco Security Appliance Command
Reference
Cisco Security Appliance Logging
Configuration and System Log
Messages
To Do This... See...
Configure a remote-access VPN Chapter 7, “Scenario: IPsec
Remote-Access VPN Configuration”
Configure an SSL VPN for Cisco
AnyConnect software clients
Chapter 8, “Scenario: Configuring
Connections for a Cisco AnyConnect
VPN Client”