Cisco ASA 5505

4-5
ASA 5505 Getting Started Guide
78-18003-02
Chapter 4 Installing the ASA 5505
Powering on the ASA 5505
Figure 4-2 Connecting to an Ethernet Interface
Step 3
Connect the other end of the Ethernet cable to a device, such as a router, desktop
computer, or printer.
Powering on the ASA 5505
To power on the ASA 5505, perform the following steps:
Step 1 Connect the power supply with the power cable.
Step 2 Connect the small, rectangular connector of the power supply cable to the power
connector on the rear panel.
Step 3 Connect the AC power connector of the power supply input cable to an electrical
outlet.
1 Ethernet switch ports 2 Ethernet cable
Security
Services
Card Slot
1
2
POWER
48
VDC
7 POWER over ETHERNET 6
5 43210
1
153761
2
Console
RESET