Cisco ASA 5505

8-11
ASA 5505 Getting Started Guide
78-18003-02
Chapter 8 Scenario: Configuring Connections for a Cisco AnyConnect VPN Client
Implementing the Cisco SSL VPN Scenario
Step 2 If you have chosen to authenticate users with the local user database, you can
create new user accounts here. You can also add users later using the ASDM
configuration interface.
To add a new user, enter a username and password, and then click Add.
Step 3 When you have finished adding new users, click Next to continue.
Specifying a Group Policy
In Step 4 of the SSL VPN Wizard, specify a group policy by performing the
following steps:
Step 1 Click the Create new group policy radio button and specify a group name.
OR
Step 2 Click the Modify an existing group policy radio button and choose a group from
the drop-down list.