Chapter 8 Scenario: Configuring Connections for a Cisco AnyConnect VPN Client
Implementing the Cisco SSL VPN Scenario
8-10
ASA 5505 Getting Started Guide
78-18003-02
b. Specify a AAA Server Group Name.
c. You can either choose an existing AAA server group name from the drop
down list, or you can create a new server group by clicking New.
To create a new AAA Server Group, click New. The New Authentication
Server Group dialog box appears.
In this dialog box, specify the following:
–
A server group name
–
The Authentication Protocol to be used (RADIUS, TACACS, SDI, NT,
Kerberos, LDAP)
–
IP address of the AAA server
–
Interface of the adaptive security appliance
–
Secret key to be used when communicating with the AAA server
Click OK.
To Next Page
Loading...
