Cisco ASA 5505

1-1
ASA 5505 Getting Started Guide
78-18003-02
CHAPTER
1
Before You Begin
Use the following table to find the installation and configuration steps that are
required for your implementation of the Cisco ASA 5505 Adaptive Security
Appliance.
To Do This... See...
Learn about typical deployments of the
ASA 5505
Chapter 2, “Deployment Planning”
Learn about VLANs and port allocation on
the ASA 5505
Chapter 3, “Planning a VLAN Configuration”
Install the chassis Chapter 4, “Installing the ASA 5505”
Perform initial setup of the adaptive
security appliance
Chapter 5, “Configuring the Adaptive Security
Appliance”
Configure the adaptive security appliance
for your implementation
Chapter 6, “Scenario: DMZ Configuration”
Chapter 7, “Scenario: IPsec Remote-Access VPN
Configuration”
Chapter 8, “Scenario: Configuring Connections for a
Cisco AnyConnect VPN Client”
Chapter 9, “Scenario: SSL VPN Clientless
Connections”
Chapter 10, “Scenario: Site-to-Site VPN
Configuration”
Chapter 11, “Scenario: Easy VPN Hardware Client
Configuration”