Cisco ASA 5505

11-9
ASA 5505 Getting Started Guide
78-18003-02
Chapter 11 Scenario: Easy VPN Hardware Client Configuration
Configuring the Easy VPN Hardware Client
Configuring the Hardware Client
To configure the ASA 5505 as an Easy VPN hardware client, perform the
following steps:
Step 1 In the ASDM window, click the Configuration tool.
Step 2 Click the Remote Access VPN tool, and then check the Enable Easy VPN
Remote check box.
If you check the Enable Easy VPN Remote check box, Easy VPN is enabled on
the device when you click Apply. If you uncheck it, when you apply the
configuration changes, you are prompted to specify if you want to clear the entire
Easy VPN configuration or whether you just want to disable the Easy VPN client
temporarily.
The Easy VPN Remote configuration pane appears.