Cisco ASA 5505

Chapter 8 Scenario: Configuring Connections for a Cisco AnyConnect VPN Client
Implementing the Cisco SSL VPN Scenario
8-8
ASA 5505 Getting Started Guide
78-18003-02
Specifying the SSL VPN Interface
In Step 2 of the SSL VPN Wizard, perform the following steps:
Step 1 Specify a Connection Name to which remote users connect.
Step 2 From the SSL VPN Interface drop-down list, choose the interface to which remote
users connect. When users establish a connection to this interface, the SSL VPN
portal page is displayed.
Step 3 From the Certificate drop-down list, choose the certificate the ASA sends to the
remote user to authenticate the ASA.
Note The ASA 5505 generates a self-signed certificate by default. However,
for enhanced security you may want to purchase a publicly trusted SSL
VPN certificate before putting the system in a production environment.