Cisco ASA 5505 - Page 74

Chapter 6 Scenario: DMZ Configuration
Configuring the Security Appliance for a DMZ Deployment
6-20
ASA 5505 Getting Started Guide
78-18003-02
Step 1 In the Configuration > Firewall > NAT Rules screen, click the green + (plus) icon
and choose Add Static NAT Rule.
The Add Static NAT Rule dialog box appears.
Step 2 In the Original area, do the following:
a. From the Interface drop-down list, choose DMZ.
b. In the Source field, enter or choose from the IP Address drop-down list the
public address of the DMZ web server. In this scenario, the IP address is
209.165.200.225.
Step 3 In the Translated area, do the following:
a. From the Interface drop-down list, choose Inside.
b. Enter or choose from the IP Address drop-down list the real address of the
DMZ web server. In this scenario, the IP address is 10.30.30.30.