8-13
ASA 5505 Getting Started Guide
78-18003-02
Chapter 8 Scenario: Configuring Connections for a Cisco AnyConnect VPN Client
Implementing the Cisco SSL VPN Scenario
Step 1 To use a preconfigured address pool, choose the name of the pool from the IP
Address Pool drop-down list.
Step 2 Alternatively, click New to create a new address pool.
Step 3 Specify the location of the AnyConnect VPN Client software image.
To obtain the most current version of the software, click Download Latest
AnyConnect VPN Client from cisco.com. This downloads the client software to
your PC.
Step 4 Click Next to continue.
To Next Page
Loading...
