Chapter 10 Scenario: Site-to-Site VPN Configuration
Implementing the Site-to-Site Scenario
10-4
ASA 5505 Getting Started Guide
78-18003-02
Step 1 From your desktop, start the Cisco ASDM Launcher software.
A dialog box appears.
Step 2 Enter the IP address or the host name of your adaptive security appliance.
Step 3 Leave the Username and Password fields blank.
Note By default, there is no Username and Password set for the Cisco ASDM
Launcher.
Step 4 Click OK.
Step 5 If you receive a security warning containing a request to accept a certificate, click
Ye s .
The ASA checks to see if there is updated software and if so, downloads it
automatically.
The main ASDM window appears.
To Next Page
Loading...
