Contents
vi
ASA 5505 Getting Started Guide
78-18003-02
Configuring Client Attributes 7-13
Configuring the IKE Policy 7-14
Configuring IPsec Encryption and Authentication Parameters 7-16
Specifying Address Translation Exception and Split Tunneling 7-17
Verifying the Remote-Access VPN Configuration 7-18
What to Do Next 7-19
CHAPTER
8 Scenario: Configuring Connections for a Cisco AnyConnect VPN Client 8-1
About SSL VPN Client Connections 8-1
Obtaining the Cisco AnyConnect VPN Client Software 8-2
Example Topology Using AnyConnect SSL VPN Clients 8-3
Implementing the Cisco SSL VPN Scenario 8-3
Information to Have Available 8-4
Starting ASDM 8-5
Configuring the ASA 5505 for the Cisco AnyConnect VPN Client 8-7
Specifying the SSL VPN Interface 8-8
Specifying a User Authentication Method 8-9
Specifying a Group Policy 8-11
Configuring the Cisco AnyConnect VPN Client 8-12
Verifying the Remote-Access VPN Configuration 8-14
What to Do Next 8-15
CHAPTER
9 Scenario: SSL VPN Clientless Connections 9-1
About Clientless SSL VPN 9-1
Security Considerations for Clientless SSL VPN Connections 9-2
Example Network with Browser-Based SSL VPN Access 9-3
Implementing the Clientless SSL VPN Scenario 9-4
Information to Have Available 9-5
Starting ASDM 9-5
To Next Page
Loading...
