Cisco ASA 5505 - Page 71

6-17
ASA 5505 Getting Started Guide
78-18003-02
Chapter 6 Scenario: DMZ Configuration
Configuring the Security Appliance for a DMZ Deployment
Step 5 In the Original area, specify the IP address to be translated. For this scenario,
address translation for inside clients is performed for the entire 10.10.10.0 subnet.
a. From the Interface drop-down list, choose the Inside interface.
b. In the Source field, enter the IP address of the client or network. In this
scenario, the IP address of the network is 10.10.10.0.
Step 6 In the Translated area, do the following:
a. From the Interface drop-down list, choose the DMZ interface.
b. In the IP Address field, enter the IP address of the internal client or network.
In this scenario, the IP address of the network is 10.10.10.0.