Changes to This Document
This table lists the technical changes made to this document since it was first created.
Table 1: Changes to This Document
SummaryDate
Added migration sections for RP3, A99-SFC3,
A99-SFC3-S, A99-SFC3-T, and RSP5 cards.
September 2018
Added support for RSP880-LT on the Cisco ASR
9906 Aggregation Services Router.
March 2018
Information added about the Cisco ASR 9906
Aggregation Services Router.
September 2017
Information added about the new route processor card
RSP880-LT.
July 2017
Information added about the Cisco ASR 9910
Aggregation Services Router.
May 2016
Added new route processor cards RSP-440 Lite and
RSP-880, FC2 fabric card, Cisco ASR 9222 support
for the version 2 air filter, support for the version 3
power system, and supported optics for Cisco IOS
XR software release 5.3.0.
January 2015
Information added for Cisco ASR 9922 version 2 fan
tray.
October 2014
Information added about installing optional air baffles
on the Cisco ASR 9006 Aggregation Services Router.
June 2014
Information added about the Cisco ASR 9904
Aggregation Services Router.
September 2013
Information added about the Cisco ASR 9912
Aggregation Services Router.
August 2013
Information added about the Cisco ASR 9000v
satellite shelf adding support for the Cisco CRS Line
Card Chassis in either the 8-slot or 16-slot variation.
May 2013
Updates and corrections made to various portions of
the document.
February 2013
Cisco ASR 9000 Series Aggregation Services Router Hardware Installation Guide
xii
Preface
Changes to This Document
To Next Page
Loading...
Need help?
General
