Cisco ASR 9000 Series Installation Guide

Figure 134: NEBS Bonding and Grounding for the Cisco ASR 9912 Router
Installing Chassis Accessories
The Cisco ASR 9000 Series Routers ship with a base set of chassis accessories. To install the base accessories
and optional accessories, see the appropriate installation procedure below for your router:
Base Accessories
The Cisco ASR 9904 Router and Cisco ASR 9910 Router do not include base chassis accessories.
Note
Optional Accessories
Installing Base Chassis Accessories on the Cisco ASR 9010 Router
The base chassis accessories for the Cisco ASR 9010 Router include:
• Two ball studs
• Two plastic side strips
• One accessory front grill
Cisco ASR 9000 Series Aggregation Services Router Hardware Installation Guide
125
Unpacking and Installing the Chassis
Installing Chassis Accessories

Cisco ASR 9000 Series Specifications

General

Series	ASR 9000
Category	Network Router
Modular Design	Yes
Redundancy	Yes (Hardware and Software)
Operating System	Cisco IOS XR
Interfaces/Ports	10G, 40G, 100G, 400G Ethernet
Expansion Slots	Varies by model
Routing Protocol	BGP, OSPF, IS-IS, EIGRP
Management	CLI, SNMP, NETCONF
Power Supply	Redundant
Port Density	Varies by model
Power Supply Options	AC, DC
Memory	Varies by model
Storage	Varies by model
Dimensions	Varies by model
Weight	Varies by model