Cisco ASR 9000 Series Installation Guide

Unpacking the Cisco ASR 9904 Router
Follow these steps to unpack the Cisco ASR 9904 Router from its wooden shipping container.
Procedure
Step 1 Cut the straps that secure the cardboard shipping container to the pallet.
Step 2 Remove the corrugated top shipping container.
Step 3 Remove the accessories and corrugated packing accessory tray.
Step 4 Remove the packing material (see the figure below).
a) Remove the foam packaging material from the top of the router.
b) Remove the plastic covering from the router and remove it from the bottom foam.
Figure 69: Unpacking the Cisco ASR 9904 Router from the Shipping Container and Pallet
Cisco ASR 9000 Series Aggregation Services Router Hardware Installation Guide
61
Unpacking and Installing the Chassis
Unpacking the Cisco ASR 9904 Router

Cisco ASR 9000 Series Specifications

General

Series	ASR 9000
Category	Network Router
Modular Design	Yes
Redundancy	Yes (Hardware and Software)
Operating System	Cisco IOS XR
Interfaces/Ports	10G, 40G, 100G, 400G Ethernet
Expansion Slots	Varies by model
Routing Protocol	BGP, OSPF, IS-IS, EIGRP
Management	CLI, SNMP, NETCONF
Power Supply	Redundant
Port Density	Varies by model
Power Supply Options	AC, DC
Memory	Varies by model
Storage	Varies by model
Dimensions	Varies by model
Weight	Varies by model