Cisco ASR 9000 Series Installation Guide

Figure 68: Unpacking the Cisco ASR 9010 Router from the Shipping Container and Pallet
Rear hold-down
bracket secured
by four screws to
the chassis, and
by two bolts to
the pallet (two
places)
3Front hold-down
bracket secured
by two screws to
the chassis
mounting
brackets, and by
two bolts to the
pallet (two
places)
2Foam packaging
material- top cap
1
Step 5 Remove components, such as line cards and the fan tray, to reduce the weight before lifting or moving the
chassis. See the Removing Components Before Installing the Chassis for more information.
Step 6 Save the packaging materials in case the router needs repackaging or shipping.
Cisco ASR 9000 Series Aggregation Services Router Hardware Installation Guide
60
Unpacking and Installing the Chassis
Unpacking the Cisco ASR 9010 Router

Cisco ASR 9000 Series Specifications

General

Series	ASR 9000
Category	Network Router
Modular Design	Yes
Redundancy	Yes (Hardware and Software)
Operating System	Cisco IOS XR
Interfaces/Ports	10G, 40G, 100G, 400G Ethernet
Expansion Slots	Varies by model
Routing Protocol	BGP, OSPF, IS-IS, EIGRP
Management	CLI, SNMP, NETCONF
Power Supply	Redundant
Port Density	Varies by model
Power Supply Options	AC, DC
Memory	Varies by model
Storage	Varies by model
Dimensions	Varies by model
Weight	Varies by model