Cisco ASR 9000 Series Installation Guide

Figure 161: Cisco ASR 9904 Router Air Baffle Dimensions—Front View
Installing Optional Chassis Accessories on the Cisco ASR 9910 Router
The optional chassis accessories for the Cisco ASR 9910 Router include:
• Side guide rails
• Rear air reflector
• Installation brackets for 2-post and 4-post rack mounting
Installing Optional Chassis Accessories on the Cisco ASR 9922 Router
The optional chassis accessories for the Cisco ASR 9922 Router include:
• Fan tray covers
• Top and bottom card cage front doors
• Rear exhaust air deflector
If you ordered the optional accessories set, follow these steps to install the accessories:
Procedure
Step 1 Remove the two screws that secure the bottom edge of the cable management tray to the chassis.
Four ball studs are preinstalled on the Cisco ASR 9922 Router chassis.
Note
Cisco ASR 9000 Series Aggregation Services Router Hardware Installation Guide
152
Unpacking and Installing the Chassis
Installing Optional Chassis Accessories on the Cisco ASR 9910 Router

Cisco ASR 9000 Series Specifications

General

Series	ASR 9000
Category	Network Router
Modular Design	Yes
Redundancy	Yes (Hardware and Software)
Operating System	Cisco IOS XR
Interfaces/Ports	10G, 40G, 100G, 400G Ethernet
Expansion Slots	Varies by model
Routing Protocol	BGP, OSPF, IS-IS, EIGRP
Management	CLI, SNMP, NETCONF
Power Supply	Redundant
Port Density	Varies by model
Power Supply Options	AC, DC
Memory	Varies by model
Storage	Varies by model
Dimensions	Varies by model
Weight	Varies by model