Cisco ASR 9000 Series Installation Guide

Figure 198: Version 1 Power Module Status Indicators
ON continuously when the input
voltage is present and within the
correct range
BLINKING when the input voltage
is out of acceptable range
OFF when no input voltage is
present
Input power LED1
ON when the power module output
voltage is present
BLINKING when the power
module is in a power limit or
overcurrent condition
Output power LED2
ON to indicate that a power module
failure has occurred
Fault LED3
Cisco ASR 9000 Series Aggregation Services Router Hardware Installation Guide
204
Troubleshooting the Installation
Troubleshooting the AC Input Power Subsystem

Cisco ASR 9000 Series Specifications

General

Series	ASR 9000
Category	Network Router
Modular Design	Yes
Redundancy	Yes (Hardware and Software)
Operating System	Cisco IOS XR
Interfaces/Ports	10G, 40G, 100G, 400G Ethernet
Expansion Slots	Varies by model
Routing Protocol	BGP, OSPF, IS-IS, EIGRP
Management	CLI, SNMP, NETCONF
Power Supply	Redundant
Port Density	Varies by model
Power Supply Options	AC, DC
Memory	Varies by model
Storage	Varies by model
Dimensions	Varies by model
Weight	Varies by model