Cisco ASR 903 Hardware Installation Guide

A900-RSP3C-200-S Supported Interface Modules
Table 8: A900-RSP3C-200 Supported Interface Modules and Part Numbers
SlotPart NumbersSupported Interface
Modules
RSP Module
All
2
A900-IMA8S8-port Gigabit Ethernet
SFP Interface Module
(8x1GE)
A900-RSP3C-200-S
A900-IMA8T8-port Gigabit Ethernet
RJ45 (Copper) Interface
Module (8x1GE)
0, 2 and 4A900-IMA1X1-port 10 Gigabit Ethernet
XFP Interface Module
(1x10GE)
0-4A900-IMA8S1Z
SFP Combo IM—8-port
SFP Gigabit Ethernet
(8x1GE) + 1-port 10
Gigabit Ethernet
(1x10GE)
A900-IMA8T1ZCopper Combo
IM—8-port 10/100/1000
Gigabit Ethernet (8x1GE)
+ 1-port 10 Gigabit
Ethernet Interface Module
(1x10GE)
A900-IMA2Z2-port 10 Gigabit Ethernet
Interface Module
(2x10GE)
4A900-IMA8Z8-port 10 Gigabit Ethernet
Interface Module
(8x10GE)
4A900-IMA2F2-port 40 Gigabit Ethernet
QSFP Interface Module
(2x40GE)
2
There are restrictions using the interface modules in different slots with RSP3 module. Contact Cisco Sales/Support for the valid combinations..
Cisco ASR 903 Aggregation Services Router Hardware Installation Guide
21
Cisco ASR 903 Router Overview
RSP Modules

Cisco ASR 903 Specifications

General

Form Factor	Modular
Storage Temperature	-40°C to 70°C (-40°F to 158°F)
Humidity	5% to 95% non-condensing
Redundancy	Yes, redundant power supplies and route processors
Operating System	Cisco IOS XE
Power Supply	AC or DC
Switching Capacity	240 Gbps
Operating Temperature	-40°C to 65°C (-40°F to 149°F)
MTBF	200, 000 hours
Supported Protocols	IPv4, IPv6, MPLS, L2VPN, L3VPN
Interfaces	Gigabit Ethernet, 10 Gigabit Ethernet, T1/E1