Cisco ASR 903 Hardware Installation Guide

8-Port 1 Gigabit Ethernet SFP Interface Module
The Gigabit Ethernet Small Form-Factor Pluggable (SFP) interface module provides eight Gigabit Ethernet
SFP modules. The figure below shows the 8-port 1 GE Gigabit Ethernet SFP interface module.
Figure 16: 8-port 1 GE Gigabit Ethernet SFP Interface Module
For information on supported SFP modules, see Cisco ASR 900 Series Aggregation Services Routers Data
Sheet.
For more information about installing an SFP Gigabit Ethernet module, see the Interface Module Installation.
Cisco ASR 903 Aggregation Services Router Hardware Installation Guide
28
Cisco ASR 903 Router Overview
Interface Modules

Cisco ASR 903 Specifications

General

Form Factor	Modular
Storage Temperature	-40°C to 70°C (-40°F to 158°F)
Humidity	5% to 95% non-condensing
Redundancy	Yes, redundant power supplies and route processors
Operating System	Cisco IOS XE
Power Supply	AC or DC
Switching Capacity	240 Gbps
Operating Temperature	-40°C to 65°C (-40°F to 149°F)
MTBF	200, 000 hours
Supported Protocols	IPv4, IPv6, MPLS, L2VPN, L3VPN
Interfaces	Gigabit Ethernet, 10 Gigabit Ethernet, T1/E1