Cisco ASR 903

InterfaceLabel
USB memory port1
USB console port2
Console port3
1 PPS input timing port4
1 PPS output timing port5
10 MHz input timing port6
10 MHz output timing port7
Time of Day (ToD) timing port8
BITS timing port9
Ethernet management port10
The Cisco A900-RSP2A module has the following front panel interfaces. For information on cable pinout,
see Troubleshooting.
• 1 USB Type-A Connector for USB-flash (Label = “MEM”)
• 1 USB Type-A Connector for alternate console port (Label = “CONSOLE”)
• RJ45 Connecter for Con/Aux (Label = “CONSOLE”)
• RJ48 Jack for BITS interface. (Label = “BITS”)
• RJ48 Jack for Time-of-Day interface. (Label= “TOD”)
• RJ45 Connecter for Con/Aux (Label = “MGMT ENET”)
• 4 Mini-Coax connectors (Label = “1PPS IN”, “1PPS OUT”, “10MHZ IN”, “10MHZ OUT”)
Figure 14: Cisco A900-RSP3C-400-S Interfaces
Cisco ASR 903 Aggregation Services Router Hardware Installation Guide
24
Cisco ASR 903 Router Overview
RSP Modules