Cisco ASR1000-RP1 - ASR 1000 Series Route Processor 1 Router - Page 8

Contents
viii
Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide
OL-16506-10
Telnet and SSH Overview for the Cisco ASR 1000 Series Routers 8-2
Persistent Telnet and Persistent SSH Overview 8-2
Configuring a Console Port Transport Map 8-3
Examples 8-4
Configuring Persistent Telnet 8-5
Prerequisites 8-5
Examples 8-7
Configuring Persistent SSH 8-8
Examples 8-10
Viewing Console Port, SSH, and Telnet Handling Configurations 8-11
Important Notes and Restrictions 8-16
CHAPTER 9 Using the Management Ethernet Interface 9-1
Gigabit Ethernet Management Interface Overview 9-1
Gigabit Ethernet Port Numbering 9-2
IP Address Handling in ROMmon and the Management Ethernet Port 9-2
Gigabit Ethernet Management Interface VRF 9-2
Common Ethernet Management Tasks 9-3
Viewing the VRF Configuration 9-3
Viewing Detailed VRF Information for the Management Ethernet VRF 9-4
Setting a Default Route in the Management Ethernet Interface VRF 9-4
Setting the Management Ethernet IP Address 9-4
Telnetting over the Management Ethernet Interface 9-5
Pinging over the Management Ethernet Interface 9-5
Copy Using TFTP or FTP 9-5
NTP Server 9-5
SYSLOG Server 9-6
SNMP-Related Services 9-6
Domain Name Assignment 9-6
DNS service 9-6
RADIUS or TACACS+ Server 9-6
VTY lines with ACL 9-7
CHAPTER 10 Synchronous Ethernet Support 10-1
Synchronous Ethernet Overview 10-1
Synchronization Status Message and Ethernet Synchronization Messaging Channel 10-2
Synchronization Status Message 10-3
Ethernet Synchronization Messaging Channel 10-3