Contents
vii
Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide
OL-16506-10
Working With Destination Profiles 7-12
Subscribing to Alert Groups 7-15
Periodic Notification 7-16
Message Severity Threshold 7-16
Syslog Pattern Matching 7-16
Configuring Contact Information 7-19
Example 7-20
Configuring the Number of Call Home Messages Sent Per Minute 7-20
Enabling and Disabling Call Home 7-21
Sending Call Home Communications Manually 7-22
Sending a Call Home Test Message Manually 7-22
Sending Call Home Alert Group Messages Manually 7-22
Submitting Call Home Analysis and Report Requests 7-23
Sending the Output of a Command to Cisco or an E-Mail Address 7-24
How To Configure Call Home to Support the Smart Call Home Service 7-25
Prerequisites 7-25
Configure and Enable Call Home 7-26
Declare and Authenticate a CA Trustpoint 7-28
Examples 7-29
Start Smart Call Home Registration 7-30
What To Do Next 7-30
Displaying Call Home Configuration Information 7-31
Examples 7-32
Default Settings 7-36
Alert Group Trigger Events and Commands 7-37
Message Contents 7-39
Sample Syslog Alert Notification in Long Text Format 7-43
Sample Syslog Alert Notification in XML Format 7-47
Additional References 7-53
Related Documents 7-53
Standards 7-53
MIBs 7-54
RFCs 7-54
Technical Assistance 7-54
Feature Information for Call Home 7-54
CHAPTER
8 Console Port, Telnet, and SSH Handling 8-1
Console Port Overview for the Cisco ASR 1000 Series Routers 8-1
Console Port Handling Overview 8-1
To Next Page
Loading...
