Cisco Catalyst 2960-X Series User Manual

4
RPS = redundant power system—only on switch models that support RPS.
5
Only on switch models that support PoE.
6
Only on switch models that support stacking.
This figure shows the switch LEDs and the Mode button that you use to select a port mode.
Figure 5: Switch LEDs and Mode Button for the Catalyst 2960-XR Switch
PoE LED
7
8IRPS LED1
USB mini-Type B console port LED9SPEED LED2
USB Type A port10STAT LED3
MGMT LED11SYS LED4
Catalyst 2960-X and 2960-XR Switch Hardware Installation Guide
OL-28309-02 9
Product Overview
LEDs

Cisco Catalyst 2960-X Series Specifications

General

Operating System	Cisco IOS
Form Factor	Rack-mountable
RAM	512 MB
Model	2960-X Series
Ports	48 x Gigabit Ethernet
Uplink Interfaces	Optional 1G or 10G uplinks
Switching Capacity	Up to 160 Gbps
Stacking	Yes, up to 8 switches
Power over Ethernet	PoE+ (IEEE 802.3at) available on selected models
Dimensions	4.4 x 45 x 28.2 cm (1.73 x 17.7 x 11.1 in)
Weight	5.4 kg
VLANs	4096
Jumbo Frame Support	9198 bytes
Power Supply	100-240VAC, 50-60 Hz
Features	Layer 2 and Layer 3 features, QoS, IPv6 support
Software	LAN Base
Operating Temperature	0 to 45°C (32 to 113°F)