Cisco Catalyst 2960-X Series User Manual

APPENDIX A
Technical Specifications
This appendix contains these topics:
•
Environmental Specifications, page 69
•
Specifications for the Catalyst 2960-X Switches, page 70
•
Specifications for the Catalyst 2960-XR Switches, page 74
Environmental Specifications
This table describes the environmental specifications.
Table 17: Environmental Specifications for All Catalyst 2960-X and 2960-XR Switches
Environmental Ranges
23 to 113°F (–5 to 45°C) up to 5,000 ft (1500 m)
23 to 104°F (–5 to 40°C) up to 10,000 ft (3000 m)
Operating temperature
10
–40 to 158°F (–40 to 70°C) up to 15,000 ft (4500 m)
Storage temperature
10 to 95% (noncondensing)Relative humidity
Up to 15,000 ft (4500 m)Storage altitude
10
Minimum ambient temperature for cold start is 32°F (0°C)
Table 18: Environmental and Physical Specification for the AC Power Supplies for the Catalyst 2960-XR Switches
Power Requirements
23 to 113°F (–5 to 45°C)Operating temperature
–40 to 158°F (–40 to 70°C)Storage temperature
Catalyst 2960-X and 2960-XR Switch Hardware Installation Guide
OL-28309-02 69

Cisco Catalyst 2960-X Series Specifications

General

Operating System	Cisco IOS
Form Factor	Rack-mountable
RAM	512 MB
Model	2960-X Series
Ports	48 x Gigabit Ethernet
Uplink Interfaces	Optional 1G or 10G uplinks
Switching Capacity	Up to 160 Gbps
Stacking	Yes, up to 8 switches
Power over Ethernet	PoE+ (IEEE 802.3at) available on selected models
Dimensions	4.4 x 45 x 28.2 cm (1.73 x 17.7 x 11.1 in)
Weight	5.4 kg
VLANs	4096
Jumbo Frame Support	9198 bytes
Power Supply	100-240VAC, 50-60 Hz
Features	Layer 2 and Layer 3 features, QoS, IPv6 support
Software	LAN Base
Operating Temperature	0 to 45°C (32 to 113°F)