Cisco Catalyst 2960-X Series User Manual

Description
Supported
Software
Image
Switch Model
24 10/100/1000 and 2 SFP+ module slots, 250-W power
supply.
IP LiteCatalyst 2960XR-24TD-I
1
48 10/100/1000 PoE+ ports (PoE budget of 740 W) and 4
SFP module slots, 1025-W power supply.
IP LiteCatalyst 2960XR-48FPS-I
1
48 10/100/1000 PoE+ ports (PoE budget of 370 W) and 4
SFP module slots, 640-W power supply.
IP LiteCatalyst 2960XR-48LPS-I
1
24 10/100/1000 PoE+ ports (PoE budget of 370 W) and 4
SFP module slots, 640-W power supply.
IP LiteCatalyst 2960XR-24PS-I
1
48 10/100/1000 and 4 SFP module slots, 250-W power supply.IP LiteCatalyst 2960XR-48TS-I
1
24 10/100/1000 and 4 SFP module slots, 250-W power supply.IP LiteCatalyst 2960XR-24TS-I
1
Front Panel
This section describes the front panel components:
•
24 or 48 downlink ports of one of these types:
◦
10/100/1000
◦
10/100/1000 PoE+
•
SFP ports
•
USB Type A connectors
•
USB mini-Type B (console) port
•
Ethernet management port
•
RJ-45 console port
•
LEDs
•
Mode button
Catalyst 2960-X and 2960-XR Switch Hardware Installation Guide
OL-28309-02 3
Product Overview
Front Panel

Cisco Catalyst 2960-X Series Specifications

General

Operating System	Cisco IOS
Form Factor	Rack-mountable
RAM	512 MB
Model	2960-X Series
Ports	48 x Gigabit Ethernet
Uplink Interfaces	Optional 1G or 10G uplinks
Switching Capacity	Up to 160 Gbps
Stacking	Yes, up to 8 switches
Power over Ethernet	PoE+ (IEEE 802.3at) available on selected models
Dimensions	4.4 x 45 x 28.2 cm (1.73 x 17.7 x 11.1 in)
Weight	5.4 kg
VLANs	4096
Jumbo Frame Support	9198 bytes
Power Supply	100-240VAC, 50-60 Hz
Features	Layer 2 and Layer 3 features, QoS, IPv6 support
Software	LAN Base
Operating Temperature	0 to 45°C (32 to 113°F)