vii
Catalyst 3550 Multilayer Switch Hardware Installation Guide
78-11358-03
Contents
Attaching the Cable Guide 2-17
Wall Mounting 2-19
Attaching the Brackets to the Switch for Wall-Mounting 2-19
Attaching the RPS Connector Cover 2-20
Mounting the Switch on a Wall 2-21
Table or Shelf Mounting 2-22
Installing the GBIC Modules 2-22
Powering On the Switch 2-24
Connecting to DC Power 2-25
Preparing for Installation 2-25
Grounding the Switch 2-26
Wiring the DC-Input Power Source 2-28
Running Post 2-34
Connecting to the 10/100 and 10/100/1000 Ports 2-34
Connecting to 100BASE-FX Ports 2-36
Connecting to the GBIC Module Ports 2-38
Connecting to a 1000BASE-X GBIC Module Port 2-38
Connecting to a 1000BASE-T GBIC Module Port 2-39
Connecting to a GigaStack GBIC Module Port 2-40
Connecting a PC or Terminal to the Console Port 2-40
Where to Go Next 2-42
CHAPTER
3 Troubleshooting 3-1
Understanding POST Results 3-1
Diagnosing Problems 3-2
To Next Page
Loading...
