•
Use any Telnet TCP/IP or encrypted Secure Shell (SSH) package from a remote management station.
The switch must have network connectivity with the Telnet or SSH client, and the switch must have an
enable secret password configured.
•
The switch supports up to 16 simultaneous Telnet sessions. Changes made by one Telnet user are
reflected in all other Telnet sessions.
•
The switch supports up to five simultaneous secure SSH sessions.
After you connect through the console port, through the Ethernet management port, through a Telnet
session or through an SSH session, the user EXEC prompt appears on the management station.
WLAN Configuration Guide, Cisco IOS XE Release 3E (Catalyst 3650 Switches)
12 OL-32353-01
Using the Command-Line Interface
Accessing the CLI Through a Console Connection or Through Telnet
To Next Page
Loading...
