Cisco Catalyst 3650 Series Configuration Guide

DescriptionParameter
Key size. Values are the following:
•
Not set
•
40 bits
•
104 bits
Key size
Key index from 1 to 4.
One unique WEP key index can be applied to each WLAN. Because there are only four WEP
key indexes, only four WLANs can be configured for static WEP Layer 2 encryption.
Because there are only four WEP key indexes, only four WLANs can be configured for static
WEP Layer 2 encryption.
Key Index
Encryption key.Encryption Key
Encryption key format in ASCII or HEX.Key Format
Key authentication that you can enable or disable.Allow Shared Key
Authentication
To configure Static WEP + 802.1X Parameters
DescriptionParameter
Static WEP Parameters
Static WEP encryption type.802.11 Data
Encryption
Displays the current selected key details.Current Key
Security type.Type
Key size. Values are the following:
•
Not set
•
40 bits
•
104 bits
Key size
Key index from 1 to 4.
The key index is unique per WLAN. You can only have one "key 1" on a given WLAN. You
can define up to 4 keys per WLAN, and the switch will announce the key index, to allow clients
configured the same way to know what key to use. This is per WLAN.
You can configure all your WLANs (up to 512) as WEP if you want, each with up to 4 keys.
Key Index
WLAN Configuration Guide, Cisco IOS XE Release 3E (Catalyst 3650 Switches)
68 OL-32353-01
Configuring WLAN Security
Configuring Layer 2 Parameters (GUI)

Cisco Catalyst 3650 Series Specifications

General

RAM	4 GB
Flash Memory	4 GB
Ports	24 or 48 10/100/1000 Ethernet ports
Uplinks	4 x 1G SFP or 4 x 10G SFP+ (depending on model)
Stacking	Up to 9 switches with StackWise-160
Layer Support	Layer 2, Layer 3
Software	Cisco IOS Software
Power Supply	Internal power supply; optional redundant power supply available
Storage Temperature	-40°F to 158°F (-40°C to 70°C)