Cisco Catalyst 9124AX Series User Manual

Figure 57: Visualization of AP Fastened to the Pivoting Wall Mounting Kit
Figure 58: Pivoting Wall Mounting Bracket
Screw holes for wall mounting.
These screw holes can also be used as slots for
steel band clamps in pole-mount installations.
3One of four bolt holes for fastening to the back
of the AP.
This is the AP-plate end of the bracket and is
fastened to the back of the AP.
1
Wall-plate end of the bracket. This plate is
fastened to the wall.
2
Cisco Catalyst 9124AX Series Outdoor Access Point Hardware Installation Guide
49
Installation Overview
Articulating Mount for the AP to a Wall or Ceiling

Cisco Catalyst 9124AX Series Specifications

General

Wi-Fi Standard	Wi-Fi 6 (802.11ax)
Frequency Bands	2.4 GHz, 5 GHz
MIMO	4x4
IP Rating	IP67
Spatial Streams	4
Power Options	802.3at PoE+, DC power adapter
Radios	Dual Radio (2.4 GHz and 5 GHz)
Antenna	Internal
Power over Ethernet	Yes
Mounting	Wall, ceiling, pole
Weight	1.2 kg
Security	WPA3, WPA2, WPA
Management	Cisco DNA Center, CLI, WebUI
Ethernet Ports	1 x 10/100/1000/2500 Multigigabit Ethernet (RJ-45)
Dimensions	220 x 220 x 66 mm