Cisco Catalyst 9500

PurposeCommand or Action
By default, the CiscoTAC-1 profile is inactive.
To use this profile with the Call Home service,
you must enable the profile.
profile CiscoTAC-1
Example:
Device(config-call-home)# profile
CiscoTAC-1
Step 6
Enables the Call Home service via HTTP.destination transport-method http
Example:
Step 7
Device(config-call-home-profile)#
destination transport-method http
Connects to CSSM.destination address http url
Example:
Step 8
Device(config-call-home-profile)#
destination address http
https://tools.cisco.com/its/service/oddce/services/DDCEService
Enables the destination profile.active
Example:
Step 9
Device(config-call-home-profile)# active
Disables the Call Home service via email.no destination transport-method email
Example:
Step 10
Device(config-call-home-profile)# no
destination transport-method email
Exits Call Home destination profile
configuration mode and returns to Call Home
configuration mode.
exit
Example:
Device(config-call-home-profile)# exit
Step 11
Exits Call Home configuration mode and
returns to global configuration mode.
exit
Example:
Step 12
Device(config-call-home)# exit
Enables the Call Home feature.service call-home
Example:
Step 13
Device(config)# service call-home
Exits global configuration mode and returns
to privileged EXEC mode.
exit
Example:
Step 14
Device(config)# exit
(Optional) Saves your entries in the
configuration file.
copy running-config startup-config
Example:
Step 15
Device# copy running-config
startup-config
System Management Configuration Guide, Cisco IOS XE Amsterdam 17.2.x (Catalyst 9500 Switches)
100
Configuring Smart Licensing
Configuring the Call Home Service for Direct Cloud Access