Cisco Catalyst 9500

PurposeCommand
Removes a specific MAC address.clear mac address-table dynamic address
mac-address
Removes all addresses on the specified physical port
or port channel.
clear mac address-table dynamic interface
interface-id
Removes all addresses on a specified VLAN.clear mac address-table dynamic vlan vlan-id
Displays the time and date configuration.show clock [detail]
Displays the Layer 2 multicast entries for all VLANs
or the specified VLAN.
show ip igmp snooping groups
Displays MAC address table information for the
specified MAC address.
show mac address-table address mac-address
Displays the aging time in all VLANs or the specified
VLAN.
show mac address-table aging-time
Displays the number of addresses present in all
VLANs or the specified VLAN.
show mac address-table count
Displays only dynamic MAC address table entries.show mac address-table dynamic
Displays the MAC address table information for the
specified interface.
show mac address-table interface interface-name
Displays the MAC address table move update
information.
show mac address-table move update
Displays a list of multicast MAC addresses.show mac address-table multicast
Displays the MAC notification parameters and history
table.
show mac address-table notification {change |
mac-move | threshold}
Displays the secure MAC addresses.show mac address-table secure
Displays only static MAC address table entries.show mac address-table static
Displays the MAC address table information for the
specified VLAN.
show mac address-table vlan vlan-id
Configuration Examples for Device Administration
Example: Setting the System Clock
This example shows how to manually set the system clock:
Device# clock set 13:32:00 23 July 2013
System Management Configuration Guide, Cisco IOS XE Amsterdam 17.2.x (Catalyst 9500 Switches)
37
Administering the Device
Configuration Examples for Device Administration