Cisco Catalyst 9500

Encryption Version: Ver1
Feature Information for Secure Storage
This table provides release and related information for features explained in this module.
These features are available on all releases subsequent to the one they were introduced in, unless noted
otherwise.
Feature InformationFeatureRelease
Secure Storage feature allows you to secure critical
configuration information by encrypting it. It
encrypts asymmetric key-pairs, pre-shared secrets,
the type 6 password encryption key and certain
credentials. An instance-unique encryption key is
stored in the hardware trust anchor to prevent it
from being compromised.
Support for this feature was introduced only on the
C9500-12Q, C9500-16X, C9500-24Q, C9500-40X
models of the Cisco Catalyst 9500 Series Switches.
Secure StorageCisco IOS XE Everest 16.5.1a
Support for this feature was introduced only on the
C9500-32C, C9500-32QC, C9500-48Y4C, and
C9500-24Y4C models of the Cisco Catalyst 9500
Series Switches.
Secure StorageCisco IOS XE Fuji 16.8.1a
Use Cisco Feature Navigator to find information about platform and software image support. To access Cisco
Feature Navigator, go to http://www.cisco.com/go/cfn.
System Management Configuration Guide, Cisco IOS XE Amsterdam 17.2.x (Catalyst 9500 Switches)
301
Configuring Secure Storage
Feature Information for Secure Storage