Cisco Catalyst 9500

PurposeCommand or Action
Disables server identity check when HTTP
connection is established.
no http secure server-identity-check
Example:
Step 6
Device(config-call-home)# no http secure
server-identity-check
Enters Call Home destination profile
configuration mode for the specified
profile name
Example:
Step 7
destination profile name. If the specified
destination profile does not exist, it is created.
Device(config-call-home)# profile test1
Enables data sharing with the Call Home
service via HTTP.
reporting smart-licensing-data
Example:
Step 8
Device(config-call-home-profile)#
reporting smart-licensing-data
Enables the HTTP message transport method.destination transport-method http
Example:
Step 9
Device(config-call-home-profile)#
destination transport-method http
Configures the destination URL (CSSM) to
which Call Home messages are sent.
destination address http url
Example:
Step 10
Note
Device(config-call-home-profile)#
destination address http
Ensure the IP address or the fully qualified
domain name (FQDN) in the destination URL
https://209.165.201.15:443/Transportgateway/services/DeviceRequestHandler
matches the IP address or the FQDN as
or
configured for the Satellite Name on the Cisco
Smart Software Manager On-Prem.
Device(config-call-home-profile)#
destination address http
http://209.165.201.15:80/Transportgateway/services/DeviceRequestHandler
(Optional) Configures a preferred message
format. The default is XML.
destination preferr ed-msg-format {long-text
| short-text | xml}
Example:
Step 11
Device(config-call-home-profile)#
destination preferred-msg-format xml
Enables the destination profile. By default, a
profile is enabled when it is created.
active
Example:
Step 12
Device(config-call-home-profile)# active
Exits Call Home destination profile
configuration mode and returns to Call Home
configuration mode.
exit
Example:
Device(config-call-home-profile)# exit
Step 13
Exits Call Home configuration mode and
returns to global configuration mode.
exit
Example:
Step 14
System Management Configuration Guide, Cisco IOS XE Amsterdam 17.2.x (Catalyst 9500 Switches)
104
Configuring Smart Licensing
Configuring the Call Home Service for Cisco Smart Software Manager On-Prem