Cisco Catalyst 9500

PurposeCommand or Action
Specifies to collect the number of packets sent
by the client.
collect connection client counter packets
long
Example:
Step 15
Device(config-flow-record)# collect
connection client counter packets long
Specifies to collect the total number of bytes
transmitted by the client.
collect connection client counter bytes
network long
Example:
Step 16
Device(config-flow-record)# collect
connection client counter bytes network
long
Specifies to collect the number of packets sent
by the server.
collect connection server counter packets
long
Example:
Step 17
Device(config-flow-record)# collect
connection server counter packets long
Specifies to collect the total number of bytes
transmitted by the server.
collect connection server counter bytes
network long
Example:
Step 18
Device(config-flow-record)# collect
connection server counter bytes network
long
Specifies to collect the time, in milliseconds,
when the first packet was seen in the flow.
collect timestamp absolute first
Example:
Step 19
Device(config-flow-record)# collect
timestamp absolute first
Specifies to collect the time, in milliseconds,
when the most recent packet was seen in the
flow.
collect timestamp absolute last
Example:
Device(config-flow-record)# collect
timestamp absolute last
Step 20
Returns to privileged EXEC mode.
Alternatively, you can also press Ctrl-Z to exit
global configuration mode.
end
Example:
Device(config)# end
Step 21
Displays information about all the flow
records.
show flow record
Example:
Step 22
Device# show flow record
Directional Flow Records
Flow Record 3 - Directional Flow Record - Ingress
System Management Configuration Guide, Cisco IOS XE Amsterdam 17.2.x (Catalyst 9500 Switches)
134
Configuring Application Visibility and Control in a Wired Network
Directional Flow Records