Cisco Catalyst 9500

PurposeCommand or Action
Specifies to collect the number of connection
initiations observed.
collect connection new-connections
Example:
Step 15
Device(config-flow-record)# collect
connection new-connections
Specifies to collect the number of packets sent
by the server.
collect connection server counter packets
long
Example:
Step 16
Device(config-flow-record)# collect
connection server counter packets long
Specifies to collect the number of packets sent
by the client.
collect connection client counter packets
long
Example:
Step 17
Device(config-flow-record)# collect
connection client counter packets long
Specifies to collect the total number of bytes
transmitted by the server.
collect connection server counter bytes
network long
Example:
Step 18
Device(config-flow-record)# collect
connection server counter bytes network
long
Specifies to collect the total number of bytes
transmitted by the client.
collect connection client counter bytes
network long
Example:
Step 19
Device(config-flow-record)# collect
connection client counter bytes network
long
Configures the use of the DNS Domain-Name
as a Collect field for a DNS flow record.
collect application dns domain-name
Example:
Step 20
Device(config-flow-record)# collect
application dns domain-name
Returns to privileged EXEC mode.
Alternatively, you can also press Ctrl-Z to exit
global configuration mode.
end
Example:
Device(config)# end
Step 21
Creating a Flow Exporter
You can create a flow exporter to define the export parameters for a flow.
System Management Configuration Guide, Cisco IOS XE Amsterdam 17.2.x (Catalyst 9500 Switches)
141
Configuring Application Visibility and Control in a Wired Network
Creating a Flow Exporter