Cisco Catalyst 9500

30sec Max Bit Rate (bps)
------------------------ ------------------------
---------------------------------------------------
ms-lync 60580
55911
31174777
28774864
3613000
93000
3613000
3437000
Total 60580
55911
31174777
28774864
3613000
93000
3613000
3437000
show policy-map interface
Displays the QoS statistics and the configured policy maps on all interfaces.
The following is a sample output for the policy-maps configured on all the interfaces:
Device# show policy-map int
GigabitEthernet1/0/1
Service-policy input: MARKING-IN
Class-map: NBAR-VOICE (match-any)
718 packets
Match: protocol ms-lync-audio
0 packets, 0 bytes
30 second rate 0 bps
QoS Set
dscp ef
Class-map: NBAR-MM_CONFERENCING (match-any)
6451 packets
Match: protocol ms-lync
0 packets, 0 bytes
30 second rate 0 bps
Match: protocol ms-lync-video
0 packets, 0 bytes
30 second rate 0 bps
QoS Set
dscp af41
Class-map: class-default (match-any)
34 packets
Match: any
System Management Configuration Guide, Cisco IOS XE Amsterdam 17.2.x (Catalyst 9500 Switches)
152
Configuring Application Visibility and Control in a Wired Network
Examples: Application Visibility and Control Configuration