Cisco Catalyst 9500

Feature InformationFeatureRelease
A switch sends the output from system messages
to a logging process. The logging process controls
the distribution of logging messages to various
destinations, such as the logging buffer, terminal
lines, or a UNIX syslog server, depending on your
configuration
Support for this feature was introduced only on the
C9500-12Q, C9500-16X, C9500-24Q, C9500-40X
models of the Cisco Catalyst 9500 Series Switches.
System Message LogsCisco IOS XE Everest 16.5.1a
Support for this feature was introduced only on the
C9500-32C, C9500-32QC, C9500-48Y4C, and
C9500-24Y4C models of the Cisco Catalyst 9500
Series Switches.
System Message LogsCisco IOS XE Fuji 16.8.1a
Use Cisco Feature Navigator to find information about platform and software image support. To access Cisco
Feature Navigator, go to http://www.cisco.com/go/cfn.
System Management Configuration Guide, Cisco IOS XE Amsterdam 17.2.x (Catalyst 9500 Switches)
189
Configuring System Message Logs
Feature History for System Message Logs