Cisco Catalyst 9500

Feature InformationFeatureRelease
Support for this feature was introduced only on the
C9500-32C, C9500-32QC, C9500-48Y4C, and
C9500-24Y4C models of the Cisco Catalyst 9500
Series Switches.
Secure CopyCisco IOS XE Fuji 16.8.1a
SSH bulk mode enables certain optimizations to
enhance the throughput performance of procedures
involving large amount of data transfer. This mode
can be enabled by using the ip ssh bulk-mode
global configuration command.
Secure Copy
Performance
Improvements
Cisco IOS XE Amsterdam
17.2.1
Use Cisco Feature Navigator to find information about platform and software image support. To access Cisco
Feature Navigator, go to http://www.cisco.com/go/cfn.
System Management Configuration Guide, Cisco IOS XE Amsterdam 17.2.x (Catalyst 9500 Switches)
251
Secure Copy
Feature Information for Secure Copy