Cisco Catalyst 9500 User Manual

CONTENTS
Administering the Device 1
CHAPTER 1
Information About Administering the Device 1
System Time and Date Management 1
System Clock 1
Network Time Protocol 2
NTP Stratum 3
NTP Associations 3
NTP Security 5
NTP Services on a Specific Interface 6
Source IP Address for NTP Packets 6
NTP Implementation 6
System Name and Prompt 7
Stack System Name and Prompt 8
Default System Name and Prompt Configuration 8
DNS 8
Default DNS Settings 8
Login Banners 8
Default Banner Configuration 9
MAC Address Table 9
MAC Address Table Creation 9
MAC Addresses and VLANs 9
MAC Addresses and Device Stacks 9
Default MAC Address Table Settings 10
ARP Table Management 10
How to Administer the Device 10
Configuring the Time and Date Manually 10
System Management Configuration Guide, Cisco IOS XE Amsterdam 17.2.x (Catalyst 9500 Switches)
iii

Cisco Catalyst 9500 Specifications

General

Software	Cisco IOS XE
Energy Efficiency	Energy Efficient Ethernet (EEE)
Warranty	Limited Lifetime Hardware Warranty
Series	Catalyst 9500
Ports	Up to 48 ports (varies by model)
Power Supply	Redundant power supplies
Operating Temperature	0°C to 40°C
Weight	Up to 35 lbs (varies by model)
Memory	16 GB DRAM, 16 GB Flash
Modularity	Modular uplinks and power supplies
Security	Cisco TrustSec, MACsec
Redundancy	Power supply redundancy
Management	CLI, SNMP, NETCONF
Latency	Sub-microsecond