Cisco Catalyst 9500

PurposeCommand
Displays the UDI information for a module
and for all the connected FRU devices: the
PID, the VID, and the serial number.
show logging onboard RP active environment [ continuous
| detail | summary ]
Device# show logging onboard RP active environmentt
Displays the hardware-related messages
generated by a module.
show logging onboard RP active message [ continuous |
detail | summary ]
Device# show logging onboard RP active message
Displays the counter information on a module.show logging onboard RP active counter [ continuous |
detail | summary ]
Device# show logging onboard RP active counter
Displays the temperature information of a
module.
show logging onboard RP active temperature [ continuous
| detail | summary ]
Device# show logging onboard RP active temperature
Displays the time when a module start, the
reason the module restart, and the length of
time that the module have been running since
they last restarted.
show logging onboard RP active uptime [ continuous | detail
| summary ]
Device# show logging onboard RP active uptime
Displays the system voltages of a module.show logging onboard RP active voltage [ continuous | detail
| summary ]
Device# show logging onboard RP active voltage
Displays the status of each OBFL application
of a module.
show logging onboard RP acti ve status [ continuous | detail
| summary ]
Device# show logging onboard RP active status
Table 19: Commands for Displaying OBFL Information
PurposeCommand
Displays the OBFL CLI commands that were
entered on a standalone switch or the specified
stack members.
show onboard switch switch-number clilog
Device# show onboard switch 1 clilog
Displays the UDI information for a standalone
switch or the specified stack members and for
all the connected FRU devices: the PID, the
VID, and the serial number.
show onboard switch switch-number environment
Device# show onboard switch 1 environment
System Management Configuration Guide, Cisco IOS XE Amsterdam 17.2.x (Catalyst 9500 Switches)
336
Troubleshooting the Software Configuration
Displaying OBFL Information