Top Vertical Mount with five Flexible Mounts
Wall Mount
To install the Catalyst Digital Building Series Switch in a flexible mount on to a wall, follow these steps :
If you are using the flexible mount with a direct-wired junction box (CDB-MNT-FLEX-DIR), refer to the
Electrical Installation section before you start the installation procedure.
Note
Before You Begin
•
Refer to Installation Guidelines section.
•
Refer to Electrical Installation section if you are using the flexible mount with direct-wired junction box
(CDB-MNT-FLEX-DIR).
Catalyst Digital Building Series Switch Hardware Installation Guide
58
Switch Installation
Flexible Mounting
To Next Page
Loading...
