D1510406 English
User Guide Cisco DX70, Cisco DX80
Produced: November 2014, All Contents © 2014
Cisco Systems, Inc. All Rights Reserved.
Settings
Accessibility Procedures (II)
Topic Procedure
Explore by Touch Onscreen Keyboard
Behavior
When Explore by Touch is enabled and the onscreen keyboard is active, the name
of each key is spoken as you drag your nger over the keys. Removing your nger
from the screen types the last key that you explored.
Enable Explore by Touch 1. Enable TalkBack.
2. Tap Accessibility.
3. Tap Explore by Touch.
4. Toggle Explore by Touch on.
Enable Touch Sounds 1. In the Settings application, tap Sounds.
2. Check Touch sounds.
Dictate Text Entry 1. Tap a text entry area. The onscreen keyboard appears.
2. Tap the microphone key on the keyboard. The keyboard is hidden, and a
microphone appears with the message S p e a k n o w.
3. Speak the words as you would like them to appear on the screen. To pause
the dictation, tap the microphone key, or stop speaking for a few seconds to
let it pause automatically. Tap the microphone icon again to resume dictation.
4. To return to the onscreen keyboard, pause the dictation, and tap the keyboard
key.
Change Touch and Hold Delay 1. In the Settings application, tap Accessibility.
2. Tap Touch & hold delay.
3. Select a short, medium, or long delay.
This is a list of procedures that can
be used to increase accessibility.
When TalkBack is enabled, you have
the option to use the Explore by
Touch feature. This is described on
the next page.
About Procedures
To Next Page
Loading...
Need help?
General
