Cisco EX90 - Making Calls via Number or URL; Initiating a Call by Dialing

12
Cisco TelePresence System EX90/EX60 Administrator guide
D14726.03 Cisco TelePresence System EX90-EX60 Administrator Guide TC4.0, December 2010.
Copyright © 2010 Cisco Systems, Inc. All rights reserved.
www.cisco.com
Using the web interface
Call and call status
Making calls from the web
interface
After you have made all the congurations, from a remote
location, it is convenient to be able to make calls from the
video system to ensure everything works as expected.
How to make a call
Input eld: Enter one or more characters in the input eld,
until the name you want to call appears in the dynamic
search list or, enter the complete name or number.
Dial: Press Dial to initiate the call.
Disconnect all: Press Disconnect all to end all calls.
Options: Click Options to display the Call rate drop down
list.
The call status page
The call status page appear when you make a call. Please
allow for approximately 30 seconds after the call is up
before checking call details.
You will nd the following information on the call status
page:
• Remote number
• Status: Connected
• Direction: Incoming/Outgoing
• Protocol: H323/SIP
• Transmit and receive call rate
• Encryption
• Audio: transmit and receive protocols
• Video: transmit and receive protocols and resolutions
• Presentation: transmit and receive protocols and
resolutions