Cisco EX90 - Placing a Call from Recent List

19
Cisco TelePresence System EX90/EX60 Administrator guide
D14726.03 Cisco TelePresence System EX90-EX60 Administrator Guide TC4.0, December 2010.
Copyright © 2010 Cisco Systems, Inc. All rights reserved.
www.cisco.com
Using the web interface
Certicates for secure logging
Audit certicate
The list of trusted audit certicates is a list containing all
audit servers that your codec trusts.
If the audit logging mode is set to ExternalSecure, the audit
logging information will only be sent to entities holding a
valid audit certicate.
About audit logging
Audit logging records all login activity and conguration
changes on the codec.
Audit logging is disabled by default, and can be enabled
using the web interface or the command line interface.
Uploading the audit certicate list
To install the audit certicate, you will need:
• Audit list le ( .PEM format)
Contact your system administrator to obtain the required
le.
• Press Browse... and locate the le with the audit list le
(.PEM format).
• Press Upload to upload the certicate to the codec.
Enable secure audit logging
When you have uploaded the audit certicate list you must
enable secure audit logging:
1. Navigate to Advanced Conguration > Security > Audit
> Server and enter the IP address of the audit server.
2. Navigate to Advanced Conguration > Security > Audit
> Logging > Mode and set it to ExternalSecure.