Cisco EX90 Administrator's Guide

33
Cisco TelePresence System EX90/EX60 Administrator guide
D14726.03 Cisco TelePresence System EX90-EX60 Administrator Guide TC4.0, December 2010.
Copyright © 2010 Cisco Systems, Inc. All rights reserved.
www.cisco.com
Advanced conguration
H323 Prole [1..1] Authentication LoginName
The system sends the Authentication Login Name and the Authentication Password to a H.323
Gatekeeper for authentication. The authentication is a one way authentication from the codec to
the H.323 Gatekeeper, i.e. the system is authenticated to the gatekeeper. If the H.323 Gatekeeper
indicates that no authentication is required, the system will still try to register. Note: Requires the
H.323 Gatekeeper Authentication Mode to be enabled.
Requires user role: ADMIN
Value space: <S: 0, 50>
Format: String with a maximum of 50 characters.
Ex a m ple: H323 Prole 1 Authentication LoginName: ""
H323 Prole [1..1] Authentication Password
The system sends the Authentication Login Name and the Authentication Password to a H.323
Gatekeeper for authentication. The authentication is a one way authentication from the codec to
the H.323 Gatekeeper, i.e. the system is authenticated to the gatekeeper. If the H.323 Gatekeeper
indicates that no authentication is required, the system will still try to register. Note: Requires the
H.323 Gatekeeper Authentication Mode to be enabled.
Requires user role: ADMIN
Value space: <S: 0, 50>
Format: String with a maximum of 50 characters.
Ex a m ple: H323 Prole 1 Authentication Password:
H323 Prole [1..1] Authentication Mode
Set the authentication mode for the H.323 prole.
Requires user role: ADMIN
Value space: <On/O>
On: If the H.323 Gatekeeper Authentication Mode is set to On and a H.323 Gatekeeper indicates
that it requires authentication, the system will try to authenticate itself to the gatekeeper. Note:
Requires the Authentication LoginName and Authentication Password to be dened on both the
codec and the Gatekeeper.
O: If the H.323 Gatekeeper Authentication Mode is set to O the system will not try to
authenticate itself to a H.323 Gatekeeper, but will still try a normal registration.
Ex a m ple: H323 Prole 1 Authentication Mode: Off
Network [1..1] Speed
Set the Ethernet link speed.
Requires user role: ADMIN
Value space: <Auto/10half/10full/100half/100full/1000full>
Auto: Autonegotiate link speed.
10half: Force link to 10 Mbps half-duplex.
10full: Force link to 10 Mbps full-duplex.
100half: Force link to 100 Mbps half-duplex.
100full: Force link to 100 Mbps full-duplex.
1000full: Force link to 1 Gbps full-duplex.
Ex a m ple: Network 1 Speed: Auto
Network [1..1] Assignment
Dene whether to use DHCP or Static IPv4 assignment.
Requires user role: ADMIN
Value space: <Static/DHCP>
Static: Set the network assignment to Static and congure the static IPv4 settings (IP Address,
SubnetMask and Gateway).
DHCP: The system addresses are automatically assigned by the DHCP server.
Ex a m ple: Network 1 Assignment: DHCP
Network [1..1] IPStack
Select which internet protocols the system will support.
Requires user role: ADMIN
Value space: <IPv4/IPv6>
IPv4: IP version 4 is supported.
IPv6: IP version 6 is supported. The IPv4 settings (IP Address, IP Subnet Mask and Gateway) will
be disabled.
Ex a m ple: Network 1 IPStack: IPv4
Network [1..1] MTU
Set the Ethernet MTU (Maximum Transmission Unit).
Requires user role: ADMIN
Value space: <400..1500>
Range: Select a value from 400 to 1500 bytes.
Ex a m ple: Network 1 MTU: 1500
The H323 settings, cont... The Network settings

Cisco EX90 Specifications

General

Microphone	Integrated
Speakers	Integrated
Connectivity	Ethernet, Wi-Fi
Video Inputs	HDMI
Audio Inputs	3.5mm
Video Standards	H.264
Audio Standards	G.711, G.722, AAC
Power Supply	Internal power supply