Cisco EX90 Administrator's Guide

34
Cisco TelePresence System EX90/EX60 Administrator guide
D14726.03 Cisco TelePresence System EX90-EX60 Administrator Guide TC4.0, December 2010.
Copyright © 2010 Cisco Systems, Inc. All rights reserved.
www.cisco.com
Advanced conguration
Network [1..1] VLAN Voice Mode
Set the VLAN voice mode.
Requires user role: ADMIN
Value space: <Tagged/Untagged>
Tagged: The voice packets in the VLAN network are tagged with VlanId and Priority.
Untagged: The voice packets in the VLAN network are untagged.
Ex a m ple: Network 1 VLAN Voice Mode: Untagged
Network [1..1] VLAN Voice VlanId
Set the VLAN voice ID.
Requires user role: ADMIN
Value space: <0..4096>
Range: Select a value from 0 to 4096.
Ex a m ple: Network 1 VLAN Voice VlanId: 0
Network [1..1] VLAN Voice Priority
Set the VLAN voice priority.
Requires user role: ADMIN
Value space: <0..7>
Range: Select a value from 0 to 7.
Ex a m ple: Network 1 VLAN Voice Priority: 0
Network [1] VLAN Data Mode
Set the VLAN data mode.
Requires user role: ADMIN
Value space: <Tagged/Untagged>
Tagged: The data packets in the VLAN network are tagged with Data VlanId and Data Priority.
Untagged: The data packets in the VLAN network are untagged.
Ex a m ple: Network 1 VLAN Data Mode: Untagged
Network [1] VLAN Data VlanId
Set the VLAN data ID.
Requires user role: ADMIN
Value space: <0..4096>
Range: Select a value from 0 to 4096.
Ex a m ple: Network 1 VLAN Data VlanId: 0
Network [1] VLAN Data Priority
Set the VLAN data priority.
Requires user role: ADMIN
Value space: <0..7>
Range: Select a value from 0 to 7.
Ex a m ple: Network 1 VLAN Data Priority: 0
Network [1..1] IPv6 Address
Enter the static IPv6 network address for the system. Only applicable if the Network IPv6 Assignment
is set to Static.
Requires user role: ADMIN
Value space: <S: 0, 64>
Format: The IPv6 address of host name.
Ex a m ple: Network 1 IPv6 Address: "ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff"
Network [1..1] IPv6 Gateway
Dene the IPv6 network gateway address. Only applicable if the Network IPv6 Assignment is set to
Static.
Requires user role: ADMIN
Value space: <S: 0, 64>
Format: The IPv6 address of host name.
Ex a m ple: Network 1 IPv6 Gateway: "ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff"
Network [1..1] IPv6 Assignment
Dene whether to use Autoconf or Static IPv6 assignment.
Requires user role: ADMIN
Value space: <Static/Autoconf>
Static: Set the network assignment to Static and congure the static IPv6 settings (IP Address and
Gateway).
Autoconf: Enable IPv6 stateless autoconguration of the IPv6 network interface. See RFC4862 for
a detailed description.
Ex a m ple: Network 1 IPv6 Assignment: Autoconf
The Network settings, cont...The Network settings, cont...

Cisco EX90 Specifications

General

Microphone	Integrated
Speakers	Integrated
Connectivity	Ethernet, Wi-Fi
Video Inputs	HDMI
Audio Inputs	3.5mm
Video Standards	H.264
Audio Standards	G.711, G.722, AAC
Power Supply	Internal power supply