Cisco Explorer Series User Manual

Appendix B
Button Sequence for DHCT Functions
130 734375 Rev H
Button Sequences
The following table details the button sequences you can use on DHCTs to force
certain behavior.
Function
Alphanumeric
LED-Equipped
DHCT
POWER LED
Indicator Only
DHCT
E940 DHCT
Temporarily stop
the DHCT from
'hunting'
Press the POWER
button during the
hunt
Press the POWER
button during the
hunt
Press the Forced
Download button
during the hunt
Download software
using the main serial
port
Press the SELECT
and GUIDE buttons
at the same time
until the download
begins
Press and hold the
CH+ button until
the download
begins
Press and hold the
Forced Download
button until the
download begins
Download software
using the optional
serial port
Press the CH+ and
CH– buttons at the
same time until the
download begins
Not available
Not available
Force a hunt when
the DHCT boots
Press the POWER
and SELECT
buttons at the same
time until the hunt
begins
Press the CH+ and
CH– buttons at the
same time until the
hunt begins
Press and hold the
Forced Download
button until the hunt
begins
Reboot the DHCT
while the OS is
booting
Press the INFO,
VOL+, and VOL-
buttons at the same
time until the DHCT
reboots
Press the POWER
and CH+ buttons at
the same time until
the DHCT reboots
Press and hold the
Forced Download
button until the
DHCT reboots

Cisco Explorer Series Specifications

General

Category	Media Converter
Series	Explorer
Model	Various (e.g., 4642HDC, 8642HDC, 9865HDC)
Type	Set-top box
Input Interfaces	CableCARD, Ethernet, USB
Output Interfaces	HDMI, Component, Composite, S-Video (depending on the model)
Video Resolution	Up to 1080p (depending on the model)
Audio Output	HDMI, Optical, RCA
Power Supply	External power adapter
Dimensions	Varies by model
Weight	Varies by model