Cisco Explorer Series User Manual

734375 Rev H 9
Introduction
This chapter provides procedures that system operators must
complete to prepare the DBDS for staging devices.
2 Chapter 2
Staging Preparations
In This Chapter
 Overview ................................................................................................ 10
 Verify DNCS System Configuration Settings ................................... 11
 Set Up Environment Variables ............................................................ 12
 Create EMM Directories ...................................................................... 14
 Set Up Default Packages for Instastaging ......................................... 15
 Set Up Service Disconnect ................................................................... 17
 Set Up the Staging Defaults ................................................................. 18
 Install Software ...................................................................................... 19
 Billing System Preparation .................................................................. 20

Cisco Explorer Series Specifications

General

Category	Media Converter
Series	Explorer
Model	Various (e.g., 4642HDC, 8642HDC, 9865HDC)
Type	Set-top box
Input Interfaces	CableCARD, Ethernet, USB
Output Interfaces	HDMI, Component, Composite, S-Video (depending on the model)
Video Resolution	Up to 1080p (depending on the model)
Audio Output	HDMI, Optical, RCA
Power Supply	External power adapter
Dimensions	Varies by model
Weight	Varies by model