Cisco Explorer Series User Manual

Load EMM Data
734375 Rev H 65
14 Select Copy to File from the File menu. The Text Editor – Copy to File window
opens.
15 Type a unique log file name for each EMM CD in the Enter file name field. The
file name typically follows this naming convention:
/dvs/dncs/tmp/emmcdlogs/<deliverynumber>.log
Example: Type /dvs/dncs/tmp/emmcdlogs/OL00251237-5618.log for the file
name. OL00251237-5618 is the delivery number of the EMM CD.
Note: You might want to use the following alternate naming convention on your
system:
/dvs/dncs/tmp/emmcdlogs/<deliverynumber>_date_time.log
16 Click OK. The system saves the log file with the new name.
17 Does the DNCS indicate that a new device type was added?
 If yes, you need to make sure a download is configured for the new device
type. Refer to Downloading New Client Application Platform Installation
Instructions (part number 4003052) for more information. When you complete
this procedure, go to step 18 of this procedure.
 If no, go to step 18.
18 From the File menu of the Text Editor window, select Close.
19 Are you loading EMM data from a CD?
 If yes, open an xterm window and type eject and press Enter to eject the CD
(or, if the GUI is open, you can eject the CD from the GUI).
 If no, go to step 20.
20 Repeat steps 1 through 18 for each additional EMM CD.
21 Go to How to Stage DHCTs (on page 67).

Cisco Explorer Series Specifications

General

Category	Media Converter
Series	Explorer
Model	Various (e.g., 4642HDC, 8642HDC, 9865HDC)
Type	Set-top box
Input Interfaces	CableCARD, Ethernet, USB
Output Interfaces	HDMI, Component, Composite, S-Video (depending on the model)
Video Resolution	Up to 1080p (depending on the model)
Audio Output	HDMI, Optical, RCA
Power Supply	External power adapter
Dimensions	Varies by model
Weight	Varies by model